The Android 7.0 nougat based OxygenOS 4.0 is rolling out for OnePlus 3. The OTA (over the air) update of official Nougat is initiated recently. Several users have already got this update and some are waiting, the update process is gradual and you may receive the update via OTA soon. However, you can also download and Install OnePlus 3 OTA OxygenOS 4.0 Stable build Manually. Here you will learn the complete method of how to and Install OnePlus 3 OTA OxygenOS 4.0 Manually.

OxygenOS 4.0 is based on Android 7.0 firmware and has all the latest and improved features of Nougat. If you also have OnePlus 3 and can’t wait anymore for OTA notification, then follow this guide. Here is everything, download the OxygenOS 4.0 and install it via the under listed step wise tutorial, don’t miss any step.

Note: The under mentioned tutorial is specifically intended to download and Install OnePlus 3 OTA OxygenOS 4.0 Manually. So, don’t try for any other purpose or any other device. Also, flashing firmware involves risks. We www.guidebeats.com strive to provide you highly accurate method but don’t claim to be free from any error. So, entirely flash and proceed at your own risk.

Install OnePlus 3 OTA OxygenOS 4.0 Stable build.

Pre- Requisites:

• To perform a full backup of the existing data on OnePlus 3 is recommended.
• Also, enable USB Debugging Mode on OnePlus 3, go to Settings → Developer options.
• Also, make sure that the battery of OnePlus has at least 70% charging level.
• Install the USB driver of OnePlus on your PC, for seamless connectivity. | Link
• Also, Install the ADB & Fastboot on your system | Windows – Mac Users

Download OxygenOS 4.0 OTA Build for OnePlus 3:

→ OxygenOS 4.0 Full Stable ROM | Download – Mirror

Steps to Install OnePlus 3 OTA OxygenOS 4.0 Stable:

1. Download the OxygenOS 4.0 and then move to the ADB Folder on C:\ drive of the PC.
2. Now turn off OnePlus 3 and then boot into recovery mode.
3. In recovery mode select “Install from ADB Sideload” and then connect the device to PC via USB cable.
4. Now run cmd window in the firmware folder that you have moved recently into ADB folder. [ press and hold shift key+ Right click, then click “Open command window here” to run cmd window.
5. Now issue the following commands, once you have run cmd window and properly connected the device to PC.
   • adb devices
   • adb sideload File-Name.zip
   • Note: (Replace File-Name with actual name of downloaded file).
   • Wait for the flashing process completion.
6. Done!

Source

So that’s how to download and Install OnePlus 3 OTA OxygenOS 4.0 Stable build Manually. If there is any issue, don’t hesitate to contact us via the discussion section below.